TH 2: Stripping & Assembling Quiz

Question 1

Put the following sequence of stripping in its proper order.1. Remove Bolt Carrier Group from Barrel Assembly Group2. Pull out front take down pin, separate Barrel Assembly Group and Upper Receiver Group3. Remove cam pin and remove bolt4. Remove magazine, cock weapon, check clear and put to safe5. On the Bolt Carrier Group, push up cross pin, remove firing pin

Answer: 4, 2, 1, 5, 3

Question 2

The last step in the Assembly drill is to carry out a "Clearing Drill".

Answer: 'False'.

Question 3

The "Operational Check" is to ensure that the weapon is assembled correctly.

Answer: 'False'.

Question 4

The Bolt assembly is found in the ___________.

Answer: Barrel Assembly Group

Question 5

At the end of the stripping drill, the safety lever will be at "Fire" mode.

Answer: 'False'.

Question 6

Removing the Lower Receiver group is not one of the steps in the stripping drill.

Answer: 'True'.

Question 7

Match the following parts to the correct group:Parts:1. Trigger2. Bolt3. Optical Scope4. Laser Aiming Device5. MagazineGroup:a. Lower Receiver Groupb. Upper Receiver Groupc. Bolt Carrier Groupd. Barrel Assembly Group

Answer: 1-a, 2-c, 3-d, 4-d, 5-b

Question 8

The first step in the assembling drill is to________.

Answer: Reassemble the Bolt Carrier Group with the bolt, cam pin and firing pin

Question 9

The standard timings for the stripping and assembling drills are __________.

Answer: 45 and 60 seconds respectively